1. Improper installation
Whenever pressing the quick-connect fitting onto the tubing, make sure that you’ve got pressed the tubing in far sufficient so it has depressed the O-ring and sealed the fitting. In the event that fitting is just forced in through the collet and has now perhaps maybe perhaps not produced a seal, water should be able to bypass the teeth that are collet’s leave out from the fitting. As soon as the tubing reaches the collet, it can produce opposition. This rebel may lead you to definitely think which you have actually pressed the tubing most of the means in to the quick-connect fitting, but, may possibly not have reached the O-ring.
One of the better methods to make sure your tubing reaches all of the way in to the fitting that is quick-connect to gauge the tubing. simply simply Take a ruler out and measure out 3/8ths of a inches from the lips for the tubing you will place to the fitting. Utilizing a marker, draw a line in the 3/8ths point. Once you push the pipe to the fitting, the tubing should get in far sufficient that the mark vanishes totally beneath the collet. Because of this, you will be aware the tubing has pressed all of the method after dark collet and has now made connection with the O-ring and formed a seal that is tight. Read more