How to make a wooden Stairs to the second floor Together with your hands – drawings and Directions

Blueprints of stairs, introduced on the world wide web, make it easy to choose the best option. But each home has its own layout features. Therefore, ready-made alternatives might not operate. Yes, and left with his own hands drawing, that will later be set up stairs, will be a special source of pride of the owner facing relatives, neighbors, friends.

To Start with, decide the positioning of the future design and create the following measurements:

  • The height of the opening. Since the basis is taken the finishing flooring, the second and first floors. The distance from one to another is the essential parameter.
  • The width of the opening. It needs to be noted that it can have a different configuration: from the very widely used – rectangular to shaped (circle, oval or alternative non invasive performance). This parameter considerably impacts the selection of design.
  • Height in the ceiling into the floor of the first floor. In the future will let you figure the height of this passing along with the appropriate layout and building of the staircase in the home.

Diagram and drawing of the stairs with dimensions in width and height. Draws a scale program of the first floor at a private house. A place is defined for the start of the staircase, the duration of the flight of stairs is marked on the floor. If the design of this first floor at the place of this structure has projections, window and door openings, markets, communications, and then they’re drawn in the scheme using a reference to its supporting structures. These stop them from overlapping even at the design phase. The more details and measurements in the program, the fewer problems during installation.

Before developing a drawing, then you should carefully examine the construction standards for stairs:

  • The thickness, width, height of the steps along the whole length of the structure should not change. This ensures the convenience and safety of motion;
  • The width of the stairwell for directly flights of stairs should be in 900 mmfor spiral structures from 800 mm
  • The elevation of the fence 900-1200 mm. It’s Better if it is provided on both sides of the stairs;
  • The drawing together with the dimensions of height of a ladder handrail

The depth of a direct step is advocated from 200 to 400 mm (optimal from 250 to 320 mm). For skipped designs on the narrowest aspect of 100 mm, on the broad to 400 mm, at the middle of 200-250 mm. Overhang of treads around 50 mm is permitted;

  • The height of these steps must be in the range of 100-180 mm
  • The angle of slope up to 45˚;
  • If the stairs go directly to the door, is outfitted with another platform thickness of at least a meter;
  • The recommended amount of measures for one airport – 18 pcs.
  • Proper drawings of the stairs to the next floor can be made just on the grounds of those parameters and additional calculations. Every form of structure has its own characteristics.

Drawing of the staircase to the second floor

There Are Numerous ways to compile design documentation:

  • Independently. Create a calculation and execute stairs drawing simple designs (directly, rotary with a platform) under force for all. More Intricate options are better left to professionals
  • They allow you to make a comprehensive design, to get a visualization of the arrangement prior to setup and to make adjustments. Using 3D images you may see how the stairs will fit into the surrounding inside. In this situation it may take a few days to learn the software;

  • Ready-made options. Drawings of stairs presented on the Internet can be provided with comprehensive detailing and without it. Such projects should be checked for compliance with calculations and construction regulations. For information, it is possible to turn to professionals.